40mm x 40mm PVC Bullnose Stair Nosing Anti Slip Rubber Angle Step Edge

40mm x 40mm PVC Bullnose Stair Nosing Anti-Slip Rubber Angle Step Edge

FEATURES & Benefits:

•  Creates an aesthetic finish to the steps
•  Protects the edges against mechanical damage
•  Protects against slipping and falling - the corrugated part of the slat ensures safe use of the stairs
•  Easy to clean - special shape of grooves
•  Increased number of grooves compared to other products on the market
•  Does not contain harmful compounds for humans and animals
•  Aesthetic appearance and a wide range of colors
•  Highly flexible product - "shape memory."
•  Easy assembly (No maintenance required)
•  Made of a special PVC mixture

Information:

• PVC stair nosing, or bull nosing, is the perfect hard-wearing safety measure for indoor steps.  
• FEATURES & Benefits High quality profile for use on stairs and communication runs. For treads finished "straight '  A fused photoluminescent element on the edge of the profile shines in the dark (the duration of illumination depends on the time and intensity of the illumination)
• Installation should be at room temperature. Clean and align the stairs' surface. Cut to the exact step width using a knife. Apply assembly glue or double-sided tape. Do not glue the lower part to the step! -press firmly -allow the glue to dry.
• Stair Tread Protector comes very well packaged so that it cannot be bent or twisted in any way. 
• Each trim comes pristine in manufacturer packaging, supplied with the correct screws and plugs for installation.
• PVC stair nosing, or bull nosing, is the perfect hard-wearing safety measure for indoor steps.
• They prevent your feet from slipping and protect the stair corners from damage, and can be adhered with a contact adhesive.

Installation:

• InstallationShould take place at room temperature. In case of low temperatures, the profile should be heated before installation using warm air or water.
• Clean and even out the surface of the stairs
• Cut the profile to the exact step width using a knife or shears
• Apply assembly glue according to the glue manufacturer's instructions or use glue tape by sticking it ONLY on the whole surface of the upper part of the profile (do not glue the lower part to the step)
• Press firmly on the step and allow the glue to dry